diff options
Diffstat (limited to 'FreeRTOS-Plus/Test/CMock/test/iar/iar_v4/Resource/at91SAM7X256_FLASH.xcl')
| -rw-r--r-- | FreeRTOS-Plus/Test/CMock/test/iar/iar_v4/Resource/at91SAM7X256_FLASH.xcl | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/FreeRTOS-Plus/Test/CMock/test/iar/iar_v4/Resource/at91SAM7X256_FLASH.xcl b/FreeRTOS-Plus/Test/CMock/test/iar/iar_v4/Resource/at91SAM7X256_FLASH.xcl new file mode 100644 index 000000000..02eaec7dc --- /dev/null +++ b/FreeRTOS-Plus/Test/CMock/test/iar/iar_v4/Resource/at91SAM7X256_FLASH.xcl @@ -0,0 +1,185 @@ +// ---------------------------------------------------------------------------- +// ATMEL Microcontroller Software Support - ROUSSET - +// ---------------------------------------------------------------------------- +// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR +// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE +// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, +// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// ---------------------------------------------------------------------------- +// File Name : at91SAM7X256_FLASH.xcl +// Object : Generic Linker Command File for IAR +// 1.0 30/Aug/05 FBr : Creation for 4.30A +// ---------------------------------------------------------------------------- + +//************************************************************************* +// XLINK command file template for EWARM/ICCARM +// +// Usage: xlink -f lnkarm <your_object_file(s)> +// -s <program start label> <C/C++ runtime library> +//************************************************************************* +// +// ------------- +// Code segments - may be placed anywhere in memory. +// ------------- +// +// INTVEC -- Exception vector table. +// SWITAB -- Software interrupt vector table. +// ICODE -- Startup (cstartup) and exception code. +// DIFUNCT -- Dynamic initialization vectors used by C++. +// CODE -- Compiler generated code. +// CODE_I -- Compiler generated code declared __ramfunc (executes in RAM) +// CODE_ID -- Initializer for CODE_I (ROM). +// +// ------------- +// Data segments - may be placed anywhere in memory. +// ------------- +// +// CSTACK -- The stack used by C/C++ programs (system and user mode). +// IRQ_STACK -- The stack used by IRQ service routines. +// SVC_STACK -- The stack used in supervisor mode +// (Define other exception stacks as needed for +// FIQ, ABT, UND). +// HEAP -- The heap used by malloc and free in C and new and +// delete in C++. +// INITTAB -- Table containing addresses and sizes of segments that +// need to be initialized at startup (by cstartup). +// CHECKSUM -- The linker places checksum byte(s) in this segment, +// when the -J linker command line option is used. +// DATA_y -- Data objects. +// +// Where _y can be one of: +// +// _AN -- Holds uninitialized located objects, i.e. objects with +// an absolute location given by the @ operator or the +// #pragma location directive. Since these segments +// contain objects which already have a fixed address, +// they should not be mentioned in this linker command +// file. +// _C -- Constants (ROM). +// _I -- Initialized data (RAM). +// _ID -- The original content of _I (copied to _I by cstartup) (ROM). +// _N -- Uninitialized data (RAM). +// _Z -- Zero initialized data (RAM). +// +// Note: Be sure to use end values for the defined address ranges. +// Otherwise, the linker may allocate space outside the +// intended memory range. +//************************************************************************* + +//************************************************************************* +// Inform the linker about the CPU family used. +// AT91SAM7X256 Memory mapping +// No remap +// ROMSTART +// Start address 0x0000 0000 +// Size 256 Kbo 0x0004 0000 +// RAMSTART +// Start address 0x0020 0000 +// Size 64 Kbo 0x0001 0000 +// Remap done +// RAMSTART +// Start address 0x0000 0000 +// Size 64 Kbo 0x0001 0000 +// ROMSTART +// Start address 0x0010 0000 +// Size 256 Kbo 0x0004 0000 + +//************************************************************************* +-carm + +//************************************************************************* +// Internal Ram segments mapped AFTER REMAP 64 K. +//************************************************************************* +-Z(CONST)INTRAMSTART_REMAP=00200000 +-Z(CONST)INTRAMEND_REMAP=0020FFFF + +//************************************************************************* +// Read-only segments mapped to Flash 256 K. +//************************************************************************* +-DROMSTART=00000000 +-DROMEND=0003FFFF +//************************************************************************* +// Read/write segments mapped to 64 K RAM. +//************************************************************************* +-DRAMSTART=00200000 +-DRAMEND=0020FFFF + +//************************************************************************* +// Address range for reset and exception +// vectors (INTVEC). +// The vector area is 32 bytes, +// an additional 32 bytes is allocated for the +// constant table used by ldr PC in cstartup.s79. +//************************************************************************* +-Z(CODE)INTVEC=00-3F + +//************************************************************************* +// Startup code and exception routines (ICODE). +//************************************************************************* +-Z(CODE)ICODE,DIFUNCT=ROMSTART-ROMEND +-Z(CODE)SWITAB=ROMSTART-ROMEND + +//************************************************************************* +// Code segments may be placed anywhere. +//************************************************************************* +-Z(CODE)CODE=ROMSTART-ROMEND + +//************************************************************************* +// Various constants and initializers. +//************************************************************************* +-Z(CONST)INITTAB,DATA_ID,DATA_C=ROMSTART-ROMEND +-Z(CONST)CHECKSUM=ROMSTART-ROMEND + +//************************************************************************* +// Data segments. +//************************************************************************* +-Z(DATA)DATA_I,DATA_Z,DATA_N=RAMSTART-RAMEND + +//************************************************************************* +// __ramfunc code copied to and executed from RAM. +//************************************************************************* +-Z(DATA)CODE_I=RAMSTART-RAMEND +-Z(CONST)CODE_ID=ROMSTART-ROMEND // Initializer for +-QCODE_I=CODE_ID + +//************************************************************************* +// ICCARM produces code for __ramfunc functions in +// CODE_I segments. The -Q XLINK command line +// option redirects XLINK to emit the code in the +// debug information associated with the CODE_I +// segment, where the code will execute. +//************************************************************************* + +//************************************************************************* +// Stack and heap segments. +//************************************************************************* +-D_CSTACK_SIZE=(100*4) +-D_IRQ_STACK_SIZE=(3*8*4) +-D_HEAP_SIZE=(1024*1) + +-Z(DATA)CSTACK+_CSTACK_SIZE=RAMSTART-RAMEND +-Z(DATA)IRQ_STACK+_IRQ_STACK_SIZE=RAMSTART-RAMEND +-Z(DATA)HEAP+_HEAP_SIZE=RAMSTART-RAMEND + +//************************************************************************* +// ELF/DWARF support. +// +// Uncomment the line "-Felf" below to generate ELF/DWARF output. +// Available format specifiers are: +// +// "-yn": Suppress DWARF debug output +// "-yp": Multiple ELF program sections +// "-yas": Format suitable for debuggers from ARM Ltd (also sets -p flag) +// +// "-Felf" and the format specifiers can also be supplied directly as +// command line options, or selected from the Xlink Output tab in the +// IAR Embedded Workbench. +//************************************************************************* + +// -Felf |