diff options
Diffstat (limited to 'FreeRTOS/Demo/T-HEAD_CB2201_CDK/csi/csi_driver/include/drv_eth_mac.h')
-rw-r--r-- | FreeRTOS/Demo/T-HEAD_CB2201_CDK/csi/csi_driver/include/drv_eth_mac.h | 422 |
1 files changed, 422 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/T-HEAD_CB2201_CDK/csi/csi_driver/include/drv_eth_mac.h b/FreeRTOS/Demo/T-HEAD_CB2201_CDK/csi/csi_driver/include/drv_eth_mac.h new file mode 100644 index 000000000..f3bda90fb --- /dev/null +++ b/FreeRTOS/Demo/T-HEAD_CB2201_CDK/csi/csi_driver/include/drv_eth_mac.h @@ -0,0 +1,422 @@ +/** + * Copyright (C) 2016 CSI Project. All rights reserved. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _CSI_ETH_H_ +#define _CSI_ETH_H_ + +#include "drv_eth.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef void *eth_mac_handle_t; + +#define MAX_FRAMELEN 1518 /* (note: maximum ethernet frame length would be 1518) */ + +#define CSI_ETH_MAC_API_VERSION CSI_DRIVER_VERSION_MAJOR_MINOR(2,1) /* API version */ + +#define _CSI_Driver_ETH_MAC_(n) Driver_ETH_MAC##n +#define CSI_Driver_ETH_MAC_(n) _CSI_Driver_ETH_MAC_(n) + +/****** Ethernet MAC Control Codes *****/ + +#define CSI_ETH_MAC_CONFIGURE (0x01) ///< Configure MAC; arg = configuration +#define CSI_ETH_MAC_CONTROL_TX (0x02) ///< Transmitter; arg: 0=disabled (default), 1=enabled +#define CSI_ETH_MAC_CONTROL_RX (0x03) ///< Receiver; arg: 0=disabled (default), 1=enabled +#define CSI_ETH_MAC_FLUSH (0x04) ///< Flush buffer; arg = CSI_ETH_MAC_FLUSH_... +#define CSI_ETH_MAC_SLEEP (0x05) ///< Sleep mode; arg: 1=enter and wait for Magic packet, 0=exit +#define CSI_ETH_MAC_VLAN_FILTER (0x06) ///< VLAN Filter for received frames; arg15..0: VLAN Tag; arg16: optional CSI_ETH_MAC_VLAN_FILTER_ID_ONLY; 0=disabled (default) + +/*----- Ethernet MAC Configuration -----*/ +#define CSI_ETH_MAC_SPEED_Pos 0 +#define CSI_ETH_MAC_SPEED_Msk (3UL << CSI_ETH_MAC_SPEED_Pos) +#define CSI_ETH_MAC_SPEED_10M (CSI_ETH_SPEED_10M << CSI_ETH_MAC_SPEED_Pos) ///< 10 Mbps link speed +#define CSI_ETH_MAC_SPEED_100M (CSI_ETH_SPEED_100M << CSI_ETH_MAC_SPEED_Pos) ///< 100 Mbps link speed +#define CSI_ETH_MAC_SPEED_1G (CSI_ETH_SPEED_1G << CSI_ETH_MAC_SPEED_Pos) ///< 1 Gpbs link speed +#define CSI_ETH_MAC_DUPLEX_Pos 2 +#define CSI_ETH_MAC_DUPLEX_Msk (1UL << CSI_ETH_MAC_DUPLEX_Pos) +#define CSI_ETH_MAC_DUPLEX_HALF (CSI_ETH_DUPLEX_HALF << CSI_ETH_MAC_DUPLEX_Pos) ///< Half duplex link +#define CSI_ETH_MAC_DUPLEX_FULL (CSI_ETH_DUPLEX_FULL << CSI_ETH_MAC_DUPLEX_Pos) ///< Full duplex link +#define CSI_ETH_MAC_LOOPBACK (1UL << 4) ///< Loop-back test mode +#define CSI_ETH_MAC_CHECKSUM_OFFLOAD_RX (1UL << 5) ///< Receiver Checksum offload +#define CSI_ETH_MAC_CHECKSUM_OFFLOAD_TX (1UL << 6) ///< Transmitter Checksum offload +#define CSI_ETH_MAC_ADDRESS_BROADCAST (1UL << 7) ///< Accept frames with Broadcast address +#define CSI_ETH_MAC_ADDRESS_MULTICAST (1UL << 8) ///< Accept frames with any Multicast address +#define CSI_ETH_MAC_ADDRESS_ALL (1UL << 9) ///< Accept frames with any address (Promiscuous Mode) + +/*----- Ethernet MAC Flush Flags -----*/ +#define CSI_ETH_MAC_FLUSH_RX (1UL << 0) ///< Flush Receive buffer +#define CSI_ETH_MAC_FLUSH_TX (1UL << 1) ///< Flush Transmit buffer + +/*----- Ethernet MAC VLAN Filter Flag -----*/ +#define CSI_ETH_MAC_VLAN_FILTER_ID_ONLY (1UL << 16) ///< Compare only the VLAN Identifier (12-bit) + + +/****** Ethernet MAC Frame Transmit Flags *****/ +#define CSI_ETH_MAC_TX_FRAME_FRAGMENT (1UL << 0) ///< Indicate frame fragment +#define CSI_ETH_MAC_TX_FRAME_EVENT (1UL << 1) ///< Generate event when frame is transmitted +#define CSI_ETH_MAC_TX_FRAME_TIMESTAMP (1UL << 2) ///< Capture frame time stamp + + +/****** Ethernet MAC Timer Control Codes *****/ +#define CSI_ETH_MAC_TIMER_GET_TIME (0x01) ///< Get current time +#define CSI_ETH_MAC_TIMER_SET_TIME (0x02) ///< Set new time +#define CSI_ETH_MAC_TIMER_INC_TIME (0x03) ///< Increment current time +#define CSI_ETH_MAC_TIMER_DEC_TIME (0x04) ///< Decrement current time +#define CSI_ETH_MAC_TIMER_SET_ALCSI (0x05) ///< Set alarm time +#define CSI_ETH_MAC_TIMER_ADJUST_CLOCK (0x06) ///< Adjust clock frequency; time->ns: correction factor * 2^31 + + +/** +\brief Ethernet MAC Time +*/ +typedef struct eth_mac_time { + uint32_t ns; ///< Nano seconds + uint32_t sec; ///< Seconds +} eth_mac_time_t; + + +/****** Ethernet MAC Event *****/ +#define CSI_ETH_MAC_EVENT_RX_FRAME (1UL << 0) ///< Frame Received +#define CSI_ETH_MAC_EVENT_TX_FRAME (1UL << 1) ///< Frame Transmitted +#define CSI_ETH_MAC_EVENT_WAKEUP (1UL << 2) ///< Wake-up (on Magic Packet) +#define CSI_ETH_MAC_EVENT_TIMER_ALCSI (1UL << 3) ///< Timer Alarm +#define CSI_ETH_MAC_EVENT_LINK_CHANGE (1UL << 4) ///< Link state + +typedef void (*eth_event_cb_t)(eth_mac_handle_t handle, uint32_t event); ///< Pointer to \ref eth_event_cb_t : Signal Ethernet Event. + +typedef enum +{ + FRAME_FILTER_RULE_POSITIVE_MATCHING = 0, /*!< Specifies that a filter should match a given pattern */ + FRAME_FILTER_RULE_NEGATIVE_MATCHING = 1, /*!< Specifies that a filter should NOT match a given pattern */ +} frame_filter_rule_t; + +/** +\brief Ethernet MAC Capabilities +*/ +typedef struct eth_capabilities { + uint32_t checksum_offload_rx_ip4 : 1; ///< 1 = IPv4 header checksum verified on receive + uint32_t checksum_offload_rx_ip6 : 1; ///< 1 = IPv6 checksum verification supported on receive + uint32_t checksum_offload_rx_udp : 1; ///< 1 = UDP payload checksum verified on receive + uint32_t checksum_offload_rx_tcp : 1; ///< 1 = TCP payload checksum verified on receive + uint32_t checksum_offload_rx_icmp : 1; ///< 1 = ICMP payload checksum verified on receive + uint32_t checksum_offload_tx_ip4 : 1; ///< 1 = IPv4 header checksum generated on transmit + uint32_t checksum_offload_tx_ip6 : 1; ///< 1 = IPv6 checksum generation supported on transmit + uint32_t checksum_offload_tx_udp : 1; ///< 1 = UDP payload checksum generated on transmit + uint32_t checksum_offload_tx_tcp : 1; ///< 1 = TCP payload checksum generated on transmit + uint32_t checksum_offload_tx_icmp : 1; ///< 1 = ICMP payload checksum generated on transmit + uint32_t media_interface : 2; ///< Ethernet Media Interface type + uint32_t mac_address : 1; ///< 1 = driver provides initial valid MAC address + uint32_t event_rx_frame : 1; ///< 1 = callback event generated + uint32_t event_tx_frame : 1; ///< 1 = callback event generated + uint32_t event_wakeup : 1; ///< 1 = wakeup event generated + uint32_t precision_timer : 1; ///< 1 = Precision Timer supported + uint32_t reserved : 15; ///< Reserved (must be zero) +} eth_capabilities_t; + +#if 0 +/** +\brief Ethernet Frame filter +*/ +typedef struct eth_frame_filter { + struct { + uint32_t and_or : 1; ///< 1 = AND: Packets will be rejected unless all enabled filters accept the packet; 0 = OR: Packets will be accepted unless all enabled filters reject the packet + uint32_t unicast_en : 1; ///< 1 = Packets with a destination address matching the local MAC address will be accepted + uint32_t multicast_en : 1; ///< 1 = Packets which have the Least Significant bit set in the destination address will be accepted + uint32_t broadcast_en : 1; ///< 1 = Packets which have a destination address of FF-FF-FF-FF-FF-FF will be accepted + uint32_t crc_en : 1; ///< 1 = All packets with an invalid CRC will be discarded + uint32_t patten_match_en : 1; ///< 1 = Packets which meet the Pattern Match criteria will be accepted + uint32_t magic_packet_en : 1; ///< 1 = Magic Packets for the local MAC address will be accepted + uint32_t hash_table_en : 1; ///< 1 = Packets which meet the Hash Table criteria will be accepted + } sum; ///< summary + uint32_t patten_match; ///< patten match filter + uint32_t magic_packet; ///< patten match filter + uint32_t hash_table; ///< hash table filter +} eth_frame_filter_t; +#else +/** + * Structure describing a frame filter list item + */ +typedef struct +{ + uint32_t id; /*!< Unique identifier for a packet filter item */ + frame_filter_rule_t rule; /*!< Filter matches are either POSITIVE or NEGATIVE matching */ + uint16_t offset; /*!< Offset in bytes to start filtering (referenced to the start of the ethernet packet) */ + uint16_t mask_size; /*!< Size of the mask in bytes */ + uint8_t* mask; /*!< Pattern mask bytes to be ANDed with the pattern eg. "\xff00" (must be in network byte order) */ + uint8_t* pattern; /*!< Pattern bytes used to filter eg. "\x0800" (must be in network byte order) */ + bool enabled_status; /*!< When returned from mhd_get_packet_filters, indicates if the filter is enabled */ +} eth_frame_filter_t; + +struct eth_frame_filter_list +{ + struct eth_frame_filter_list* next; +}; +typedef struct eth_frame_filter_list eth_frame_filter_list_t; +#endif + +typedef struct { + eth_event_cb_t cb_event; + eth_capabilities_t capabilities; +}eth_mac_priv_t; + +/** + \brief Get driver version. + \param[in] handle ethernet handle + \return ethernet version including chip version and driver version +*/ +csi_drv_version_t csi_eth_mac_get_version(eth_mac_handle_t handle); + +/** + \brief Get driver capabilities. + \param[in] handle ethernet handle + \return ethernet capabilities +*/ +eth_capabilities_t csi_eth_mac_get_capabilities(eth_mac_handle_t handle); + +/** + \brief This function is used to initialize Ethernet device and related resource, an event callback is registered. It is called when the middleware component like TCPIP starts operation. + \param[in] cb callback to handle ethernet event + \return return ethernet handle if success + */ +eth_mac_handle_t csi_eth_mac_initialize(eth_event_cb_t cb); + +/** + \brief This function is used to de-initialize Ethernet device. It is called when the middleware component stops operation and releases the software resources used by the interface. + \param[in] handle ethernet handle + \return error code + */ +int32_t csi_eth_mac_uninitialize(eth_mac_handle_t handle); + +/** + \brief Control Ethernet MAC Device Power. + \param[in] handle ethernet handle + \param[in] state Power state + \return error code +*/ +int32_t csi_eth_mac_power_control(eth_mac_handle_t handle, eth_power_state_t state); + +/** + \brief Get Ethernet MAC Address. + \param[in] handle ethernet handle + \param[in] mac Pointer to address + \return error code +*/ +int32_t csi_eth_mac_get_macaddr(eth_mac_handle_t handle, eth_mac_addr_t *mac); + +/** + \brief Set Ethernet MAC Address. + \param[in] handle ethernet handle + \param[in] mac Pointer to address + \return error code +*/ +int32_t csi_eth_mac_set_macaddr(eth_mac_handle_t handle, const eth_mac_addr_t *mac); + +/** + \brief Configure Address Filter. + \param[in] handle ethernet handle + \param[in] addr Pointer to addresses + \param[in] num_addr Number of addresses to configure + \return error code +*/ +int32_t csi_eth_mac_set_addrfilter(eth_mac_handle_t handle, const eth_mac_addr_t *addr, uint32_t num_addr); + +/** + \brief Send Ethernet frame. + \param[in] handle ethernet handle + \param[in] frame Pointer to frame buffer with data to send + \param[in] len Frame buffer length in bytes + \param[in] flags Frame transmit flags (see CSI_ETH_MAC_TX_FRAME_...) + \return error code +*/ +int32_t csi_eth_mac_send_frame(eth_mac_handle_t handle, const uint8_t *frame, uint32_t len, uint32_t flags); + +/** + \brief Read data of received Ethernet frame. + \param[in] handle ethernet handle + \param[in] frame Pointer to frame buffer for data to read into + \param[in] len Frame buffer length in bytes + \return number of data bytes read or execution status + - value >= 0: number of data bytes read + - value < 0: error occurred, value is execution status as defined with execution_status +*/ +int32_t csi_eth_mac_read_frame(eth_mac_handle_t handle, uint8_t *frame, uint32_t len); + +/** + \brief Get size of received Ethernet frame. + \param[in] handle ethernet handle + \return number of bytes in received frame +*/ +int32_t csi_eth_mac_get_rx_framesize(eth_mac_handle_t handle); + +/** + \brief Get time of received Ethernet frame. + \param[in] handle ethernet handle + \param[in] time Pointer to time structure for data to read into + \return error code +*/ +int32_t csi_eth_mac_get_rx_frametime(eth_mac_handle_t handle, eth_mac_time_t *time); + +/** + \brief Get time of transmitted Ethernet frame. + \param[in] handle ethernet handle + \param[in] time Pointer to time structure for data to read into + \return error code +*/ +int32_t csi_eth_mac_get_tx_frametime(eth_mac_handle_t handle, eth_mac_time_t *time); + +/** + \brief Control Ethernet Interface. + \param[in] handle ethernet handle + \param[in] control Operation + \param[in] arg Argument of operation (optional) + \return error code +*/ +int32_t csi_eth_mac_control(eth_mac_handle_t handle, uint32_t control, uint32_t arg); + +/** + \brief Control Precision Timer. + \param[in] handle ethernet handle + \param[in] control Operation + \param[in] time Pointer to time structure + \return error code +*/ +int32_t csi_eth_mac_control_time(eth_mac_handle_t handle, uint32_t control, eth_mac_time_t *time); + +/** + \brief Read Ethernet PHY Register through Management Interface. + \param[in] handle ethernet handle + \param[in] phy_addr 5-bit device address + \param[in] reg_addr 5-bit register address + \param[out] data Pointer where the result is written to + \return error code +*/ +int32_t csi_eth_mac_phy_read(eth_mac_handle_t handle, uint8_t phy_addr, uint8_t reg_addr, uint16_t *data); + +/** + \brief Write Ethernet PHY Register through Management Interface. + \param[in] handle ethernet handle + \param[in] phy_addr 5-bit device address + \param[in] reg_addr 5-bit register address + \param[in] data 16-bit data to write + \return error code +*/ +int32_t csi_eth_mac_phy_write(eth_mac_handle_t handle, uint8_t phy_addr, uint8_t reg_addr, uint16_t data); + +/** + \brief Callback function that signals a Ethernet Event. + \param[in] handle ethernet handle + \param[in] event event notification mask + \return none +*/ +void csi_eth_mac_signal_event(eth_mac_handle_t handle, uint32_t event); + +/** + \brief Add Frame Filter Setting with Filter ID. + \param[in] handle ethernet handle + \param[in] filter Pointer to filter setting + \return error code +*/ +int32_t csi_eth_mac_add_framefilter(eth_mac_handle_t handle, const eth_frame_filter_t *filter); + +/** + \brief Remove Frame Filter Setting. + \param[in] handle ethernet handle + \param[in] filter_id Frame Filter ID + \return error code +*/ +int32_t csi_eth_mac_remove_framefilter(eth_mac_handle_t handle, uint32_t filter_id); + +/** + \brief Enable/Disable Specified Frame Filter ID. + \param[in] handle ethernet handle + \param[in] filter_id Frame Filter ID + \param[in] en Enable or disable + \return error code +*/ +int32_t csi_eth_mac_en_framefilter(eth_mac_handle_t handle, uint32_t filter_id, bool en); + +/** + \brief Get frame filter table list. + \param[in] handle ethernet handle + \param[in] list frame filter table list + \param[in] count_out the count of filter setting added + \param[in] max_count max filter setting can be supported + \return error code +*/ +int32_t csi_eth_mac_get_framefilter(eth_mac_handle_t handle, eth_frame_filter_list_t* list, uint32_t* count_out, uint32_t max_count); + + +#ifdef CONFIG_ETH_ENC28J60_USE_PBUF +/** + \brief Begin to Send Ethernet frame. + \param[in] handle ethernet handle + \param[in] len Frame buffer length in bytes + \return error code +*/ +int32_t csi_eth_mac_ex_send_frame_begin(eth_mac_handle_t handle, uint32_t len); + +/** + * send a packet data + * @param address the packet data length + * + * @return + * - sent data length + */ +int32_t csi_eth_mac_ex_send_frame(eth_mac_handle_t handle, const uint8_t *frame, uint32_t len, uint32_t flags); + +/** + \brief End Send Ethernet frame. + \param[in] handle ethernet handle + \return error code +*/ +int32_t csi_eth_mac_ex_send_frame_end(eth_mac_handle_t handle); + +/** + \brief Read data of received Ethernet frame. + \param[in] handle ethernet handle + \param[in] frame Pointer to frame buffer for data to read into + \param[in] len Frame buffer length in bytes + \return number of data bytes read or execution status + - value >= 0: number of data bytes read + - value < 0: error occurred, value is execution status as defined with execution_status +*/ +int32_t csi_eth_mac_ex_read_frame(eth_mac_handle_t handle, uint8_t *frame, uint32_t len); + +/** + \brief Begin to Read data of received Ethernet frame. + \param[in] handle ethernet handle + \param[in] len Frame buffer length in bytes + \return >0 data byte in hardware buffer + ==0 no data + < 0 error +*/ +int32_t csi_eth_mac_ex_read_frame_begin(eth_mac_handle_t handle); + +/** + \brief Begin to Read data of received Ethernet frame. + \param[in] handle ethernet handle + \return error code +*/ +int32_t csi_eth_mac_ex_read_frame_end(eth_mac_handle_t handle); +#endif + +#ifdef __cplusplus +} +#endif + +#endif |