diff options
Diffstat (limited to 'qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender')
3 files changed, 305 insertions, 0 deletions
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..ea29ac2417 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.map.sender")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.map.sender")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("1eec2eca-adbd-4394-8b01-f4c4645bb122")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.cs new file mode 100644 index 0000000000..9001eb8e0b --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.cs @@ -0,0 +1,146 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Collections.ObjectModel;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.examples
+{
+ class MapSender
+ {
+ // csharp.map.sender example
+ //
+ // Send an amqp/map message to amqp:tcp:localhost:5672 amq.direct/map_example
+ // The map message contains simple types, a nested amqp/map,
+ // an ampq/list, and specific instances of each supported type.
+ //
+ static int Main(string[] args)
+ {
+ string url = "amqp:tcp:localhost:5672";
+ string address = "message_queue; {create: always}";
+ string connectionOptions = "";
+
+ if (args.Length > 0)
+ url = args[0];
+ if (args.Length > 1)
+ address = args[1];
+ if (args.Length > 2)
+ connectionOptions = args[2];
+
+ //
+ // Create and open an AMQP connection to the broker URL
+ //
+ Connection connection = new Connection(url, connectionOptions);
+ connection.Open();
+
+ //
+ // Create a session and a sender to the direct exchange
+ //
+ Session session = connection.CreateSession();
+ Sender sender = session.CreateSender(address);
+
+ //
+ // Create structured content for the message. This example builds a
+ // map of items including a nested map and a list of values.
+ //
+ Dictionary<string, object> content = new Dictionary<string, object>();
+ Dictionary<string, object> subMap = new Dictionary<string, object>();
+ Collection<object> colors = new Collection<object>();
+
+ // add simple types
+ content["id"] = 987654321;
+ content["name"] = "Widget";
+ content["percent"] = 0.99;
+
+ // add nested amqp/map
+ subMap["name"] = "Smith";
+ subMap["number"] = 354;
+ content["nestedMap"] = subMap;
+
+ // add an amqp/list
+ colors.Add("red");
+ colors.Add("green");
+ colors.Add("white");
+ // list contains null value
+ colors.Add(null);
+ content["colorsList"] = colors;
+
+ // add one of each supported amqp data type
+ bool mybool = true;
+ content["mybool"] = mybool;
+
+ byte mybyte = 4;
+ content["mybyte"] = mybyte;
+
+ UInt16 myUInt16 = 5 ;
+ content["myUInt16"] = myUInt16;
+
+ UInt32 myUInt32 = 6;
+ content["myUInt32"] = myUInt32;
+
+ UInt64 myUInt64 = 7;
+ content["myUInt64"] = myUInt64;
+
+ char mychar = 'h';
+ content["mychar"] = mychar;
+
+ Int16 myInt16 = 9;
+ content["myInt16"] = myInt16;
+
+ Int32 myInt32 = 10;
+ content["myInt32"] = myInt32;
+
+ Int64 myInt64 = 11;
+ content["myInt64"] = myInt64;
+
+ Single mySingle = (Single)12.12;
+ content["mySingle"] = mySingle;
+
+ Double myDouble = 13.13;
+ content["myDouble"] = myDouble;
+
+ Guid myGuid = new Guid("000102030405060708090a0b0c0d0e0f");
+ content["myGuid"] = myGuid;
+
+ content["myNull"] = null;
+
+ //
+ // Construct a message with the map content and send it synchronously
+ // via the sender.
+ //
+ Message message = new Message(content);
+ sender.Send(message, true);
+
+ //
+ // Wait until broker receives all messages.
+ //
+ session.Sync();
+
+ //
+ // Close the connection.
+ //
+ connection.Close();
+ return 0;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.csproj new file mode 100644 index 0000000000..0e42201b6d --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{5D8252F5-E1D3-44A0-94C7-7CB75E843C10}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.map.sender</RootNamespace>
+ <AssemblyName>csharp.map.sender</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.map.sender.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file |